Skip to main content

 FREE Shipping on Orders Over $100!*Exclusions apply.        

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Electronics

Trek Madone SLR Blendr Mono Base
Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look
Wahoo Blue SC Speed/Cadence Sensor (BT/ANT+)
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices. - No tangled wires on your bike to connect the sensor to your device. - Provides accurate speed data during your ride - Provides accurate cadence data during your ride - BlueSC comes with a rubber band mount and zip tie mount. - The Blue SC sensor will fit with most bikes and frame sizes
Sigma Sport Mounting Bracket DTS/STS (2032)
$3.02
Wireless mounting bracket for 2012, 2009 STS & 2006 DTS model computers. Handlebar or stem mount. Compatible models: BC 1106 DTS BC 1606L DTS BC1706HR DTS BC 2006 MHR DTS BC 1009 STS BC 1609 STS BC 8.12 ATS BC 12.12 STS BC 14.12 STS BC 16.12 STS Baseline 1200 plus
Bontrager Duotrap S Cover - Carbon Road Frame
$3.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager SpeedTrap Accessories
$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet
Lezyne GPS O-Ring Set
$3.99
Easily secure your GPS cycling computer to your favorite bike. Includes: - Two sets of O-rings (two diameters) - A backup O-ring in each size
Bontrager DuoTrap S Chainstay Cover - Alloy Frames
$4.99
Replacement chainstay cover for DuoTrap S Digital Sensor
Bontrager Madone DuoTrap Chainstay Frame Cover
$4.99
Frame Cover fills chainstay pocket when sensor is removed.
K-Edge Replacement Garmin Insert Kit
$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
MSW Cadence Sensor Magnet
$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.
Bontrager Computer Batteries
$5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager USB Fast Charge Cable
$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
Lezyne GPS Bar/Stem O-Ring Mount
$6.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.
CatEye FlexTight Kit Wireless CC
$7.00
Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.
Problem Solvers Shimano Di2 Junction Box Under Stem Mount
$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
MSW Speed Sensor Magnet
$8.00
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
CatEye Universal Wheel Magnet
$8.72
Wheel magnet for all CatEye cycle computers
Bontrager Blendr Circuit MIPS Bike Helmet Mount Rear
$9.99
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
K-Edge Go Big Thumb Screw
$9.99
Hand tight adjustability and 4mm hex wrench lockable. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Combo Mounts, Light&Camera Mounts. - Aluminum knurled thumbscrew - Stainless Steel bolt with 4MM hex feature - Weight: 10g - Anodized Color: Black - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacturer defects. Damages due to abuse or crashing excluded
SRAM QuickView Adaptor
$10.47
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
K-Edge Replacement Wahoo Insert Kit
$10.50
Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws
Bontrager 26mm Cadence Band Magnet
$12.00
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager 4mm Cadence Band Magnet
$12.00
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager Cadence & Speed Magnets
$12.00
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Bontrager Blendr Kovee Pro 35 Stem Bases
$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look
MSW Miniac GPS Handlebar Mount
$15.00
Handlebar mount to fit Miniac 322 and 333 GPS computers. Fits up to 31.8mm round handlebars. Plastic construction with rubber shim. - Keeps handlebar clean - Adjustable height angle for better visibility during riding - Simple one bolt attachment
MSW Miniac Harness
$15.00
Heavy-duty harness for Miniac 7-function computer.
Bontrager Pro Ride Wallet Plus
$15.99
- Sliding closure helps keep sweat and precipitation away from valuables - Large, clear, center window allows easy operation of touch screen - Compatible with most smartphones - 7.5"" (19cm) x 4.5"" (11cm) wide
Lezyne GPS Front Bar Mount
$16.49
The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.
No Image
$17.34
Wire harness and hardware to measure computer data based on the front wheel. - Fits most bars bars (25.0 to 31.8mm), 86cm wire, wheel magnet (fits up to 4mm bladed spokes) and zip ties - Compatible with: Protege 5.0, 8.0 and 9.0
Page 1 of 7 Next page